Kguard-security TC series Uživatelský manuál stáhnout pdf

TC DVR firmware upgrade

Warning

If you upgrade to the new firmware then you cannot downgrade to the previous version.

We would like to remind you that upgrading firmware on your own have some risks just like

upgrading computer motherboard’s BIOS. In case any error introduced during the update

process, the DVR will be bricked. It is no longer usable. Please be aware of this.

If you are aware of the situation, willing to bear the risk and insist to upgrade on your own.

The updating procedure will take 7~9 minutes. Video will be turned off during upgrading

process. Please do not turn off power or remove USB drive during upgrading process.

TC DVR will restart automatically after update is completed.

Please note that we can not support for update failure.

There are three point you need to set up:

 Firmware Upgrade

 Load Default

 Format HDD

 Video System Setup

1. Please check your TC DVR model number, then download your TC DVR’s firmware.

TC series DVR：

http://kguardsecurity.server289.com/kguard/Firmware/TC_DVR/

Please go to the URL and select your DVR model number to download firmware

2. When you select the WEB link, it will show the following picture. Please select “Save”

1 2 3 4 5 6 7 8 9

TC DVR firmware upgrade Warning If you upgrade to the new firmware then you cannot downgrade to the previous version. We would like to remind you

3. Download the file and save it to the desktop. 4. System will download TC DVR Firmware, select “Close” when finished. 5. Check desktop see if

8. In DVR menu, go to ”Main Manu” 9. Select ”SYSTEM” 10. Select ”MAINTAIN”

11. Select ”SYSTEM UPDATE” 12. DVR will show message “System Updating! Please Don’t power off DVR and don’t remove USB device!” means system upgrad

Load Default 1. In DVR menu, go to ”Main Manu” 2. Select ”SYSTEM” 3. Select ”MAINTAIN”

4. Select ”Load Default” After the device restart , it would finish load default process.

Format HDD 1. Select “Main Menu”→ “DEVICE”→ “HDD” 2. Select the hard disk drive that you want to format. 3. Click Format HDD. 4. An “All data w

3. Select ”VIDEO”

4. Please Check Video System is set to NTSC. If not , change "Video System" from PAL to NTSC → Click“Apply” When you save the settings,

Žádné komentáře

Kguard-security TC series Uživatelský manuál